The Smart street light module (ACR-SLC-DALI-NEMA) is used for remote control of the luminaire, to switch on/off or dim the light. Module communicates over wireless LPWAN network LoRa and uses DALI output signal for direct control of ballast in luminaire. It has three operational mode - manual, semi-automatic and automatic.
It is UV resistant, with IP65 protection and it's designed for outdoor installation in the NEMA socket.
Firmware update is performed wirelessly over LoRa.
| General information | |
| IP coverage: | IP65 |
| Dimensions: | Ø 88 x 62 mm |
| Operational temperature: | -30 .. +50 °C |
| Weight: | 160 g |
| Mounting: | NEMA plug |
| Mounting standard: | Standard ANSI C136.41 Dimming Receptacle |
| Precision Real Time Clock (RTC): | Yes, from GPS |
| Automatic positioning: | Yes, from GPS |
| Power supply | |
| Voltage: | 100- 230 VAC |
| Frequency: | 47-63 Hz |
| Maximum power consumption: | 2 W |
| Power consumption when idle: | < 0.4 W |
| Maximum lamp power: | 400W |
| Communication Interface | |
| Bus: | DALI |
| Transparent DALI: | Yes |
| Operating mode: | Message from the server |
| Fallback when communication fails: | Last known commands series |
| LPWAN communication | |
| LoRaWAN specification: | 1.0.1 |
| Registration method: | ABP or OTAA |
| Class: | C |
| Frequency: | 868 MHz (ISM) |
| TX Power: | 12,7dBm |
| Antenna: | Internal |