This USB to TTL serial configuration cable is used to configure our IoT Converters and it's designed with FTDI chipset, so you don't need to install any drivers on your computer. The configuration is via ACRIO GUI available at https://gui.acrios.com/
¶ Technical specification
| Product variants | |
| Optically isolated: | No |
| Blocking voltage: | 0 V |
| Parameters | |
| Conversion type: | USB to 3.3V TTL converter |
| Baud rate: | 3Mbaud (115 200 for ACR-CV converters) |
| Converter connector type: | 3.5mm jack |
| Chip type: | FT232 |
| PC connector | USB A |
| General | |
| Cable length: | 1.5m |
| Weight: | 80g |
| Operating temperatures: | -40°C..+85°C |
| HS code: | 85444299 |
| Ordering code | |
| ACR-CONFIG | Programming cable without optical isolation |